NCMAG 2012 Workshop Schedule
Junior Memberships may be purchased for $30 on the Member Application Page.
Please pay for membership before selecting the discounted member rates. Thank you!
Cuttlebone Casting
January 21st and 22nd*
Learn an ancient casting technique using the soft, carve-able bone of the cuttle fish. You might recall this technique illustrated at the beginning of The Lord of the Rings, when the infamous ring was made. Students will learn to cut, carve and cast into the cuttle bone. Everyone will make a ring or pendant using bronze that will be provided. There is no prerequisite for this workshop.
Time: 10:00 AM to 5:00 PM
Sign up deadline: Registration Closed
Materials Required for this workshop:
Splash Safety Goggles
Waterproof Sandpaper (400 and 600 grit, one sheet each)
Needle File Set
Enameling Techniques
February 18th and 19th*
Students will learn basic enameling techniques including choosing and preparing metals and enamels, using the enameling kiln, and finishing enameled pieces. Sifting and Champleve enameling techniques will be covered and each student will leave with at least one finished piece. There is no prerequisite for this workshop.
Time: 10:00 AM to 5:00 PM
Sign up deadline: Registration Closed
Materials Required for this workshop:
Face Mask with Respirator
Your favorite rubber stamp
Saw, File, Solder: Rings
March 17th and 18th*
Students will learn the basics of metalsmithing including using a jewelers saw, files and torch while creating their own one of a kind sterling silver ring. Time: 10:00 AM to 5:00 PM
Sign up deadline:
Materials Required for this workshop:
Splash Safety Goggles
Waterproof Sandpaper (400 and 600 grit, one sheet each)
Needle File Set
Jeweler's Saw Frame
Saw Blades: #1 and #2/0
1" x 3" 18g or 20g sterling silver sheet metal
Flux
Medium Sheet Solder
Cold Connections
April 21st and 22nd*
Learn basic techniques for creating metal jewelry without a torch! This workshop will focus on rivets, chains, and tab settings. Previous experience with a jewelers saw and file is recommended though not required. Time: 10:00 AM to 5:00 PM
Sign up deadline: April 14th Registration Closed
Materials Required for this workshop:
Splash Safety Goggles
Waterproof Sandpaper (400 and 600 grit, one sheet each)
Needle File Set
Jeweler's Saw Frame
Saw Blades: #1 and #2/0
Materials may be purchased at the following local retailers:
Talisman - Eureka, CA (Old Town) - Jewelers Saw, Saw Blades, Files, Metal, Flux, Solder
Heart Bead - Arcata, CA (Plaza) - Jewelers Saw, Saw Blades, Files, Metal, Flux, Solder
Harbor Freight - Arcata, CA - Files, Goggles, Face Mask
Ace Hardware - Various locations - Sand Paper, Goggles, Face Mask
-----------------------------------------------------------------------------------------------------
Demonstrations
Please sign up for our email newsletter if you would like to receive updates on workshops and other guild events.
Demonstrations
NC Black Presents: Basic Micro Shell Forming Demo
April 2nd, 6-9pm
Watch the newest set of tools on the market in action! Micro Shell forming techniques are very useful in today’s market due to the rising costs of precious metals. Now, using these specially designed tools, NC BLACK will demonstrate to metalsmiths just how they can learn to use thinner gauge materials yet create voluminous and structurally sound forms using one half the typical amount of metal in a micro format. Using the NEW Micro Shell Forming Tools from NC BLACK Co., metalsmiths can watch the basics of Micro Shell Forming. Micro sized spiculums and micro anticlastic raising are but two of the techniques illustrated. Synclastic Forming on the micro scale is now possible with the new series of Micro Synclastic/Shell Forming Hammers developed by NC BLACK Co. In this demo the NC BLACK Team will walk you through the benefits of using this micro set and teach you how to create small, delicate forms with ease.
These tools are 100% made in the USA, in the state of North Carolina!
Designed and Manufactured by Metalsmiths for Metalsmiths
www.ncblack.com
TOOLS AVAILABLE FOR PURCHASE AT THIS DEMONSTRATION:
These tools are 100% made in the USA, in the state of North Carolina!
Designed and Manufactured by Metalsmiths for Metalsmiths
www.ncblack.com
TOOLS AVAILABLE FOR PURCHASE AT THIS DEMONSTRATION:
----------------------------------------------------------------------------------------------------------
*Dates are subject to change or cancellation
*Dates are subject to change or cancellation
For more information email us at ncmetalartsguild@gmial.com or stop by Hunter Plaid Gallery (Wed-Sat 12-5pm), 90 Sunny Brae Center, Arcata, CA.
Please sign up for our email newsletter if you would like to receive updates on workshops and other guild events.
***Private Lessons Available by Request***
Studio Attire: Workshop and Open Studio participants MUST wear close toed shoes, Long pants, and keep long hair pulled back at all times. Participants are expected to treat people and tools with respect. Studio techs reserve the right to remove any persons who refuse to cooperate.
Studio Attire: Workshop and Open Studio participants MUST wear close toed shoes, Long pants, and keep long hair pulled back at all times. Participants are expected to treat people and tools with respect. Studio techs reserve the right to remove any persons who refuse to cooperate.
